Mobile Welder Dubai — We Come to You
Gate stuck, railing loose, AC cage hanging off the wall? A technician drives out with the welding rig already loaded — villa, apartment, rooftop, warehouse, doesn't matter. No dragging metal to a workshop across town.
Some Repairs Just Can't Travel
A pool ladder bolted into marble decking, a gate welded into a driveway frame, a balcony railing fourteen floors up — none of that fits in the back of a van. Moving it usually causes more damage than the original fault.
What Changes When the Welder Comes to You
A pool ladder bracket that's cracked at the deck plate doesn't need the pool drained. We lower the water line, work around it, and the kids are back in swimming the same evening. An AC cage that's come loose on the 8th floor gets re-welded on the balcony — no lift bookings, no scraped paintwork from carrying it down a stairwell.
Workshops are built around a different priority: keep the shop running, fit residential jobs in between commercial contracts. Our set-up runs the other way. The technician, the generator, the grinder, the stock metal — all of it arrives at your address, because that's where the actual problem is.
- Gate not closing properly because a hinge weld has cracked
- Balcony railing that flexes when you lean on it
- AC cage or bracket rattling loose on a high floor
- Staircase handrail pulling away from its wall anchor
- Pergola, carport, or shade structure that needs strengthening
What Dubai's Weather Actually Does to Metal
Salt in the coastal air, blowing sand, and a 35-degree swing between a July afternoon and a January night — that combination eats through coatings faster than most people expect. Corrosion can hollow out a bracket from the inside while the outer surface still looks fine.
That's why probing the metal matters before any weld goes on. A hinge that looks like it just needs a re-weld sometimes turns out to have a wall thickness of a millimetre or less underneath the rust. In that case we fabricate a reinforcement plate or a new bracket rather than welding onto metal that won't hold.
In older buildings around Deira or Satwa, the original iron work often has detailing that's genuinely hard to source today. We repair around that instead of replacing it outright, so the character of the piece stays intact while the structural part gets fixed properly.
60+ Service Vehicles, Positioned Across Dubai
A welder is only as useful as how fast they can reach you. Dubai Repairs runs a fleet of more than 60 fully equipped service vehicles spread across the emirate — not parked at one depot, but stationed near the communities we serve, from Marina and Downtown through to Al Quoz and Dubai South.
That spread is what makes the 60–90 minute emergency window realistic rather than a marketing number. Whichever part of Dubai you're calling from, there's usually a vehicle already close by, stocked with steel, stainless, aluminium, generators, and the same tools a fixed workshop would have.
This fleet doesn't just serve welding jobs — it's shared across our handyman, carpentry, and maintenance teams too, so the same network that gets a welder to your villa can also get an electrician, a carpenter, or a plumber out on a separate call the same day.
When It Can't Wait Until Morning
A sheared lock bracket on the main gate at nine at night isn't a job that can sit until Sunday. Neither is a balcony railing that's suddenly loose with kids in the house. These calls get treated as priority, not queued behind routine bookings.
The technician who shows up carries portable power and site lighting, so a job doesn't stall because it's dark or there's no power point nearby. Emergency call-outs cost more than a scheduled visit — that's the trade-off for pulling a team off a Friday evening — but the rate is quoted before anyone starts work, not added afterward.
A Few Repairs From the Last Few Months
Every one of these was quoted on-site before work started, and tested before the technician left. These are representative examples, not a full log — but they show the range of what comes up.
Entrance Gate Hinge Sheared Off
Lower hinge on a double steel gate had cracked clean through at the weld, and the gate was dragging on the driveway surface. Reinforcement plate fabricated on-site, both hinge points re-welded, rust-inhibiting primer applied. Gate has run smoothly since.
14th-Floor Balcony Railing
Three upright posts had corroded at the base plate after roughly four years of salt-laden air working under the coating. Corroded sections cut out, new stainless inserts fabricated, TIG-welded and polished to match the existing finish.
Pool Ladder Bracket, Cracked at Deck
Removing the ladder would have meant draining the pool and drilling new anchors through marble tiles. Instead, water level was lowered by around 30cm and the bracket was welded in place. Pool was usable again by evening.
AC Cage Bracket, 8th Floor
Bracket had snapped under the compressor's vibration load, leaving the unit tilted and unsafe. Original bracket re-welded, secondary support arm fabricated to spread the load, finished in zinc-rich coating for coastal exposure.
Mezzanine Support Column, Forklift Damage
Forklift impact had partially separated the weld at a structural upright's base plate, leaving a visible lean. Base plate re-welded for full penetration, gusset plates added at the stress point, section load-tested before sign-off.
Custom Rooftop Pergola Frame
Irregular rooftop footprint meant no off-the-shelf pergola would fit. Frame measured and fabricated on-site in mild steel with aluminium cross-members, hot-dip primed, installed over two days, built to Dubai's wind-load requirements.
What a Job Like This Usually Costs
Ranges below reflect what most jobs actually land at — final price depends on the metal, the access, and how much fabrication is involved. You get the number in writing before anyone picks up a grinder.
| Service | What It Covers | Typical Range (AED) |
|---|---|---|
| Standard Call-Out | Technician dispatch anywhere in Dubai | 150 – 250 |
| Emergency Call-Out | Nights, weekends, public holidays | 300 – 450 |
| Basic Repairs | Hinges, small cracks, brackets | 200 – 400 |
| Structural Work | Load-bearing repairs, safety railings | 400 – 800 |
| Stainless Steel | Pool ladders, marine fixtures | 500 – 1,000 |
| Aluminium Work | Pergola frames, carport structures | 600 – 1,200 |
| Custom Fabrication | Building new components on-site | 300 – 700 + materials |
| Gate Repair / Re-weld | Hinge plates, frame sections, alignment | 100 – 280 |
| Railing Repair | Balcony, staircase, pool railings | 120 – 350 |
| AC Bracket / Cage | Bracket repair, cage fabrication | 80 – 300 |
How the Pricing Actually Breaks Down
- Call-out fee is waived on jobs over AED 500
- Standard steel is charged at cost — no markup added
- Stainless and aluminium carry a 15% materials surcharge for grade sourcing
- Quote is given in writing before work starts, not adjusted afterward
- Emergency rate is 1.5× standard for nights, weekends, and public holidays
- Cash, card, or bank transfer all accepted
What to Check Before Letting Anyone Weld in Your Home
Letting a welder into a villa or an occupied apartment means trusting them with an open flame near your furniture, your flooring, and your family. Here's what we'd want checked if we were hiring someone ourselves.
Licensed, Not Freelance
Every technician holds a valid UAE trade licence and has cleared Dubai Police background verification. Dubai Repairs has operated as a registered Dubai company with a physical office since 2008 — this isn't a one-man WhatsApp operation.
Insured Against Damage
Commercial liability cover extends to property damage up to AED 5 million. Over 50,000 service calls completed across Dubai to date, with a 4.8-star average from verified customer reviews.
Salary, Not Commission
Technicians are paid a salary and judged on workmanship and customer feedback — not on how much extra work they can sell you. If a part genuinely needs replacing, that's what gets recommended, nothing more.
Trade-Certified Welders
Technicians hold active American Welding Society (AWS) certifications, work within Dubai Municipality technical guidelines, and use equipment compliant with UAE electrical safety standards.
Gulf-Specific Experience
Senior technicians average around 12 years working specifically in Gulf conditions — how different stainless grades respond to salt air, how thermal expansion stresses a weld here, which filler metals hold up in this climate.
Photo Records on File
Every repair is documented with before-and-after photos and job specifications, kept on file. Useful for owner reports if you're a property manager, and for your own records if any structural work was involved.
Straight Answers, No Sales Pitch
Genuine safety emergencies — a gate that won't lock, a railing that's about to give way — get a technician out in 60 to 90 minutes on average, using whichever of our 60+ vehicles is closest to you. Non-urgent bookings are usually scheduled within 24 hours.
Yes. Gated villa communities, towers with tight security desks, older buildings in Deira, newer developments in Creek Harbour — we deal with the access process for all of them regularly and carry the trade licence and insurance paperwork building management usually asks to see.
Protective sheeting goes down first, magnetic spark catchers go around the weld point, and a wet-dry vacuum picks up metal dust as we go. None of that is optional — it's part of every job. We walk through the protection plan with you before starting.
Mild steel, stainless, aluminium, cast iron, galvanised steel, and wrought iron. Each one needs a different process and filler material — we bring the right setup for the metal in front of us rather than one generic rig for everything.
Once you factor in transport, the time off work, and the risk of damage from moving something heavy, a call-out often comes out cheaper — and for anything bolted into a structure, it's usually the only realistic option anyway. Price is confirmed before work starts either way.
Scheduling shifts around fasting hours during Ramadan. Outside of that, late-night visits are reserved for genuine emergencies and billed at the emergency rate — we try not to disturb a household or a building's other residents unless it's actually urgent.
Your location, what's broken, the metal type if you know it, and whether the piece can be moved. A WhatsApp photo helps the technician bring the right stock the first time. Mention any building access rules too, like a security desk approval or gate code.
Every Part of Dubai, Not Just the Well-Known Bits
Marina to Mirdif, Jebel Ali to International City — if it's in Dubai, one of our 60+ vehicles can reach it.
Downtown & Business Bay
Marina & Coastal
Villa Communities
Emerging Areas
Established Dubai
Industrial & Commercial
Get Your Metal Fixed Where It Stands
Call, send a photo on WhatsApp, or ask for a quote — a technician from the nearest of our 60+ vehicles can usually be with you the same day.